gagalight RGB6000 Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} gagalight RGB6000. gagalight RGB6000 17 pages. Laser light
Imprimer la pageInstallation of the System
!
The manufacturer is not liable for damages or a injury caused by improper installation
of the system.
The installation should be carried by a qualified installer who should follow the Laser
Please follow these rules during the installation:
Safety Regulations of respective country.
1: Do not connect the device to power supply during the installation.
2: Mount the system only to mounting point that is strong, secure and away from places
where non-authorised person could get an access to.
3:Always make sure the system is properly tighten down and that it cannot get loose and
move as a result of sound vibrations, cable pull or similar.
4: Always use a safety rope.
5: Ensure that all the cables have enough leverage just in case they get caught.
6: Ensure that the system is placed at least 20cm away from walls or any other objects
including drapes etc.
7: Ensure that the system is placed well away from any heat sources including spotlights,
moving heads, radiators, etc. Make sure there is a sufficient air-flow around the laser system.
8: It is essential that the fan openings are never covered during the laser operation.
9: Always follow the Laser Safety Regulations of respective country where the laser is being
used.
Control System
The overall performance of any our laser system is also dependent on the control system that
you use for operating the laser as well as the correct device configuration in the laser control
software.There are many laser control options on the market but we mainly recommend
control systems from these two manufacturers:
Pangolin Laser Systems
Showtacle
第 6 页