Gage Bilt GB734V Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Gage Bilt GB734V. Gage Bilt GB734V 11 pages. Installation tool

HEAD

Remove nose assembly and adapter from tool before attempting disassembly of head assembly.

WARNING:

DISPOSE OF HYDRAULIC FLUID IN ACCORDANCE WITH ALL ENVIRONMENTAL LAWS AND REGULATIONS

APPLICABLE TO YOUR AREA.

Remove end cap (734111-1). Push against threaded end of head piston (734107) to slide it out of head

cylinder (734102). Be careful not to damage threads or cause burrs on polished piston rod surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply

Loctite® #242 and torque the button head cap screws (402479) uniformly to 40 inch lbs. to prevent leakage

around the gasket.

734102

HEAD CYLINDER ASSEMBLY

703506 - BOTTLE, BUSHING

AND CAP ASSEMBLY

703537 - FITTING ASSEMBLY

401089 - BACK-UP RING

S834 - O'RING

402482 - BUTTON HEAD CAP SCREW

S572 - STAT-O-SEAL

703509 - TUBING (10 FT.)

(TO A-216 (2)

A-216

(TO HANDLE)

(TO 703537 & 700440)

734107 - PISTON

S834 - O'RING

A-506 - TEE

A-216 - FITTING

703589- TUBING (10 FT.)

400790 - O'RING

S829 - O'RING

401112 - BACK-UP RING

A-289 - O'RING

A-503

ADAPTER

A-508 - ADAPTER

703515 - VACUUM REGULATOR

700440 - FITTING

734111-1 - END CAP

703518 - MUFFLER

REV. 8/13