Gage Bilt GB744 Manuel d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Gage Bilt GB744. Gage Bilt GB744 13 pages.

HEAD

WARNING:

Dispose of hydraulic oil in accordance with all environmental regulations applicable in your area.

Remove nose assembly from tool before attempting disassembly of head assembly.

Remove end cap (744414). Push against threaded end of piston (744409) to slide it out of head cylinder assy (744103). Be careful not

to damage threads or cause burrs on polished piston (744409) surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the

four button-head cap screws (402479) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).

Rev. 2/15