Gage Bilt GBP712C Manuel - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Gage Bilt GBP712C. Gage Bilt GBP712C 10 pages. Installation tool

Imprimer la page

PLEASE READ THIS MANUAL BEFORE SERVICING OR USING THIS

TOOL. COMPLETE WITH WARNINGS AND CAUTIONS TO PREVENT

SEVERE PERSONAL INJURY OR DAMAGE THE TOOL.

GAGE BILT TOOLS ARE APPROVED TO INSTALL HUCK®, AVDEL®, CHERRY®, POP®

AND OTHER FASTENERS WHEN USED BY PERSONS WITH SPECIFIC TRAINING OF

BLIND RIVET AND LOCKBOLT INSTALLATION EQUIPMENT.

WARNING

Do not pull fastener unless it is placed in

an assembly, pin will eject forcibly when

pintail breaks off. Severe personal injury

may result.

WARNING

When operating installation equipment

always wear approved eye protection. Do

not look in front of nose assembly or rear

of tool when installing fastener.

WARNING

Do not operate if deflector, bottle, catcher

bag or vacuum tube is removed or

damaged, broken pintails may eject

forcibly from rear of tool. Severe personal

injury may result.

WARNING

Installation of fasteners may exceed

acceptable noise levels. Use approved

hearing protection.

CAUTION

Keep Nose Assemblies clean and free of

chips and debris.

NOTE:

CAUTION:

Do not operate without Stat-O-Seal (S572)

and cap screw (402482). Pressurized

hydraulic fluid may cause severe personal

Always disconnect tool from power

before performing any maintenance to

any tool or nose assembly. Insure that all

connections are proper and there are no

visible leaks from tool or hoses before

connecting to power.

Insure that nose assembly and tip are

properly matched for the fastener being

Be sure there is adequate clearance for

tool and operator's hands before

proceeding. Keep fingers clear of any

moving parts. Keep fingers clear from

fasteners and installed materials. Severe

personal injury may result.

WARNING

injury.

WARNING

CAUTION

installed.

WARNING