Gage Bilt GB510ABOM Manuel d'instructions original - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions original pour {nom_de_la_catégorie} Gage Bilt GB510ABOM. Gage Bilt GB510ABOM 20 pages. Installation tool

Imprimer la page
Approved for use on Gage Bilt CE installation tools and/or other manufacturer's CE approved tools of similar design.
The GB940 Hydraulic Powerunit is a light-weight, portable power source designed to operate on a wide range of hydraulic installation tools.
The unit is electrically powered and delivers
remote control circuit, in the installation equipment, controls the pump output directional valve. The GB940 Hydraulic Powerunit is available in
115 volt or 230* volt, single phase, alternating current. Output pressures as shipped are: PULL 5400-5700 psi, RETURN 2200-2400 psi.
The GB940 Hydraulic Powerunit is available separately or in kits including hydraulic quick-disconnect couplers, electrical connectors and
hose cord kits in various lengths.
GB510BOM/GB510ABOM INSTALLATION TOOL: S/N 1001 AND ABOVE
CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS
Accessories.
(Sold Separately)
GB940 ELECTRIC POWERUNIT
(Sold Separately)
689.48 bar)
GB940-12 includes the GB940 and 12 ft. (3.7m) Hose Kit, part #940701
GB940-26 includes the GB940 and 26 ft. (7.9m) Hose Kit, part #940705
GB940-38 includes the GB940 and 38 ft. (11.6m) Hose Kit, part #940709
GB940-52 includes the GB940 and 52 ft. (15.8m) Hose Kit, part #940714
Image may not reflect actual tools
16
outputs. The 24 volt
11/20 REV 121/22