5th Wheel TDR01Z Manuel d'instructions original - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions original pour {nom_de_la_catégorie} 5th Wheel TDR01Z. 5th Wheel TDR01Z 13 pages.
Imprimer la page
Seat installation and adjustment
MIN.INSERTION
• Open the seatpost clamp and pull
out the seatpost，Or adjust to the
appropriate height.The maximum
height of adjustment shall not be
higher than the safety line
Air inflation
with inflator
• Unscrew the riser cap and
draw the gas cylinder
assembly;
5
Replacement or installation of battery
• Open the E-bike folding
•Remove the used battery
buckle;
and insert the new one.
• Tightly insert the inflator
• Flip the fixed buckle 90°,
to the valve;
and then hold the cushion
and start to inflate.
Inflation pressure range：280-460Kpa
5. Electrical Schematic Diagram
Motor
Instrument
10A charging fuse
30A discharge fuse
Booster signal
Negative pole
Controller
Light signal
Negative pole
Front and
rear lights
Electric Break
Battery charging port
6