GREAT ARBOR GAC-252 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} GREAT ARBOR GAC-252. GREAT ARBOR GAC-252 20 pages. Wi-fi dial up router

Imprimer la page

G E T T I N G

S T A R T E D

wait for 5 seconds and put the power back. Once the SYS LED is solid green, press the

DIAL

button. If the Internet LED does not start flashing once per second after 1 minute

then consult the Troubleshooting Section in this guide.

Turn on your PC and scan for wireless networks. This procedure can be different for

different Operating Systems. For example on Windows XP, you can view the available

WiFi networks by clicking the WiFi icon on the right end of the bottom panel and then

OpenWrt

selecting "View Wireless Networks". The router WiFi ID -

will appear. If it

doesn't, wait for 10 seconds, and re-scan (Refresh Network List in Windows XP). Select

OpenWrt

and click Connect. Next to the Internet LED is the WiFi LED which will

flash if a computer or other device is connected wirelessly to the router.

Figure 1 Back and Side panels of the GAC-252 showing the connections for modem, power, and PC

Front Panel

Power

SYS

WiFi

Internet

LAN(1-4)

USB

Ignore

Figure 2 Front panel LED display of the GAC-252

Start a web browser on the PC (Internet Explorer for example) and see if you can access

websites on the Internet. If the INTERNET LED is blinking but you cannot connect to

websites then your PC may not be connected properly to the router. Refer to the

Troubleshooting section for help. Once you are done with the Internet session, press

the same

DIAL

button to disconnect the connection. The default phone number

configured in the router is a long distance number and you may incur long distance

charges for this first connection. You should now go ahead and customize the router

with the phone number and account information for your own ISP account and

optionally configure WiFi security.

If you want to use the router in wired mode, connect the PC's LAN port with the supplied LAN cable to any one of the 4

LAN ports on the router. Make sure that the PC is configured to get an IP address automatically (usual configuration

for a PC.