Great Circle LCE01 Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Great Circle LCE01. Great Circle LCE01 18 pages. Chipper shredder

Imprimer la page

8. Never attempt to reposition or move the chipper shredder unit while it is running. Doing so could cause the

machine to tip over, and reaching to steady the unit could result in accidental insertion of your hands into the

chipper cone or shredder hopper areas.

9. Never continue to operate the machine if it starts making unusual noise or vibration. Shut the engine off immedi-

ately, allow the rotor to stop, disconnect the spark plug wire and secure the wire away from the spark plug.

Inspect the unit for any signs of damage or foreign material in the chipping or shredding areas. Remove any

solid material that may be preventing the unit from operating properly.

10. Never attempt to clear clogs from the chipper cone, shredder hopper or discharge chute while the unit is

running. Always shut the engine off, allow the rotor to come to a complete stop, and remove the spark plug wire

from the spark plug before removing excess materials.

11. Never attempt to perform any maintenance, repairs, or attachment of accessories while the unit is running.

Always shut the unit off, allow the rotor to come to a complete stop, and remove the spark plug wire from the

spark plug before beginning these activities.

12. Always make sure that the shredding chamber, shredder hopper, and chipper cone are empty before starting

the unit after it has been idle. Attempting to start the unit with material in these areas could cause the engine

starting cord to stop suddenly, injuring your hand and fingers, or toppling the unit over. Vibration is generally a

warning sign of trouble.

13. Use only attachments and accessories approved of by the manufacturer of the machine.

14. Make sure chipper shredder is free of debris before starting the engine.

15. Never attempt to make any adjustments while the engine is running.

16. After striking a foreign object, stop the engine, remove spark plug wire, and wait for all moving parts to come to

a complete stop. Thoroughly inspect the machine for any damage, repair the damage before restarting and

operating the machine.

ENGINE SPECIFIC SAFETY

Before cleaning, repairing, or inspecting, shut off the engine and make certain that all moving parts have come to a

complete stop. Disconnect the spark plug wire and secure the wire away from the spark plug to prevent accidental

starting.

DANGER

1. Engines give off carbon monoxide, an odorless, colorless, poison gas. Carbon monoxide may be pres-

ent even if you do not smell or see any engine exhaust. Breathing carbon monoxide can cause nausea,

fainting or death, in addition to drowsiness, dizziness and confusion. If you experience any of these

symptoms, seek fresh air and medical attention immediately.

2. If your machine comes with a separate engine manual, be sure to read and follow all safety and warning

precautions outlined there, in addition to any in this manual.

Handle fuel with care; it is highly flammable.

a. Use an approved fuel container.

b. Never add fuel to a running engine or hot engine.

c. Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

d. Replace gasoline cap securely and clean up spilled fuel before restarting.

Preventing Carbon Monoxide Poisoning

1. Always start and run engine outdoors. Do not start or run engine in an enclosed area, even if doors or windows are open.

2. Never try to ventilate engine exhaust indoors. Carbon monoxide can reach dangerous levels very quickly.

3. Never run engine outdoors where exhaust fumes may be pulled into a building.

4. Never run engine outdoors in a poorly ventilated area where the exhaust fumes may be trapped and not easily

taken away. (Examples include: in a large hole or areas where hills surround your working area.)

5. Never run engine in an enclosed or partially enclosed area. (Examples include: buildings that are enclosed on

one or more sides, under tents, car ports or basements.)

6.Always run the engine with the exhaust and muffler pointed in the direction away from the operator.

7. Never point the exhaust muffler towards anyone. People should always be many feet away from the operation of

the engine and its attachments.

8. Do not change the engine governor settings or over-speed the engine.

9. Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect.