6K Products DH0648 8G24 Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} 6K Products DH0648 8G24. 6K Products DH0648 8G24 12 pages. Simple saw assembly

Imprimer la page

After assembling the components as shown in figure 2, position the saw bar square to the log, at the correct height

with clearance between the bar plate and the side of the largest log and weld down solidly (Fig. 3). The dimensions

in figure 3 can be changed as required for your installation. You will need to fabricate and position a lever to feed

the saw through the cut and return it to the retracted position. You will need to make guarding to protect the

operator from sawdust and touching the chain.

Fig. 3