Hi-Force TWS45N Manuel d'utilisation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Hi-Force TWS45N. Hi-Force TWS45N 7 pages. Square drive hydraulic torque wrenches
Imprimer la pageTDS1288
PLACING THE TOOL IN SERVICE
LUBRICATION
Marine Grade Moly Lube
Lubrication frequency is dependent on factors known only to the user. The amount of contaminants in the work
area is one factor. Tools used in a clean room environment will obviously require less service than a tool used
out-doors and dropped in loose dirt or sand. Marine Grade Moly Lube is formulated not to wash out of the tool in
areas where lubrication is critical.
Whenever lubrication is required, lubricate as follows:
1. Remove the Drive Plate, Ratchet, Segment Pawl and Drive Sleeves and wash the components in a suitable
cleaning solution in a well–ventilated area.
2. After drying the components, wipe a film of Moly Lube (Marine Grade) onto the wear surface of both Drive
Sleeves and the ends of the Ratchet.
3. Spread a light film of Moly Lube (Marine Grade) onto the inner face and both sides of the Drive Plate.
Do not pack the teeth of the Segment Pawl or Ratchet with lube. It can prevent the teeth from engaging
properly.
Page 5 of 7
www.hi-force.com
0609