Great Lakes GL36SR Manuel d'instructions d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Great Lakes GL36SR. Great Lakes GL36SR 12 pages. 19" eia wall mount swing rack
Également pour Great Lakes GL36SR : Manuel d'instructions d'installation (8 pages)
Imprimer la page
MOUNTING INSTRUCTIONS
Wood Studded Wall
Once the location on the wall has been determined, inspect the wall surface.
The wall must be flat and square in the horizontal and vertical plane to ensure
the Swing Rack closes correctly. If the wall is not flat and square, you might be
required to use shims.
Wood studded wall mounting instructions apply to a 2" x 4" wood stud wall
with 3/4" plywood.
SR recommended Mounting Hardware for Wood Studded Wall
ALL SIZES
SRD recommended Mounting Hardware for Wood Studded Wall
GL24SRD
Qty (4) 3/8 x 2" long Lag Bolts and 1" O.D. Flat Washer
GL36SRD
Qty (8) 3/8 x 2" long Lag Bolts and 1" O.D. Flat Washer
GL48SRD
Qty (8) 3/8 x 2" long Lag Bolts and 1" O.D. Flat Washer
Masonry Wall Surface
For masonry wall surface, the installer must provide all the appropriate
hardware.
INSTALLATION
Loading Equipment
WARNING: Only install equipment after the Swing Rack has been properly
secured. Do not move the Swing Rack assembly while loaded.
To maintain uniform distribution of the mechanical load in the Swing Rack,
load the heaviest equipment first, at the bottom of the Swing Rack and load
the lighter units at the top.
Maximum load capacity is as follows:
PART NO.
GL24SR
GL36SR
GL48SR
GL24SRD
GL36SRD
GL48SRD
Qty (4) 3/8 x 2" long Lag Bolts and 1" O.D. Flat Washer
H
24.512"
20.562"
36.763"
20.562"
48.763"
20.562"
24.12"
20.62"
36.37"
20.62"
49.62"
20.62"
W
D
18.00"
18.00"
18.00"
24.00"
24.00"
24.00"
RMU
WEIGHT CAP.
12
50
19
50
26
50
12
100
19
100
26
100
3