Gaggenau CE 481 Manuel d'instruction - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Gaggenau CE 481. Gaggenau CE 481 20 pages. Glass ceramic cooktop

Imprimer la page

Changing the cooking time

Select the cooking zone. Touch the M symbol.

Change the cooking time.

Cancelling prematurely

Select the cooking zone. Touch the M symbol. Set it

to ‹‹. The display goes out after a few seconds. The

cooking zone continues to heat with the selected heat

setting.

Note: The cooking timer is no longer active if there is

a power cut.

Short-term timer

You can also use the integrated timer independently of

the function of the appliance as a short-term timer.

The short-term timer can also be used if all of the

cooking zones are switched off.

Setting the short-term timer

The cooktop must have been switched on at the main

switch. No cooking zone should have been selected.

Touch the M symbol.

‹‹ lights up on the timer display.

Use the magnetic knob to set the required

cooking time.

If all of the cooking zones are switched off, the

appliance goes into stand-by mode. Only the timer

display lights up.

When the cooking time has elapsed, the ‹‹ display

flashes. A signal sounds for 3 minutes. Touch the M

symbol. The display goes out and the audible signal

ceases.

To correct the cooking time, touch the M symbol and

use the magnetic knob to change the cooking time.

Note: The short-term timer no longer functions after a

power cut.

Safety shut-off

A cooking zone is automatically switched off if the

setting is not changed for a long time. The time when

the safety shut-off is activated depends on the heat

setting selected (1 to 10 hours).

The cooking zone is switched off and the residual heat

indicator lights up on the heat setting display until the

cooking zone cools down.

You can switch the cooking zone back on again as

normal.