Great Lakes GL48SR Manuel d'instructions d'installation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Great Lakes GL48SR. Great Lakes GL48SR 12 pages. 19" eia wall mount swing rack
Également pour Great Lakes GL48SR : Manuel d'instructions d'installation (8 pages)
Imprimer la page
STEP 1
Place the back brace onto the four threaded studs on the two side brace
assemblies. Secure with four #10-32 acorn nuts. Tighten with 3/8" nut driver.
Install the top brace to the outside of the two side brace assemblies with four
#10-32 x 1/4" Phillips Pan Head screws, but do not tighten screws; install the
bottom brace in the same manner. The large formed edge of the top/bottom
braces mount towards the rear and the inside of the swing rack.
Top/Bottom
Brace (qty. 2)
Side Brace Assembly
(qty. 2)
#10-32 x 1/4" Phil
Pan Head Screw
(4 locations on bottom)
Rear Brace (qty. 1)
#10-32 x 1/4" Phil
Pan Head Screw
(4 locations on top)
#10-32
Acorn nut
(4 locations)
Top/Bottom
Brace
5