Gaggenau VI491 Manuel d'instruction - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Gaggenau VI491. Gaggenau VI491 16 pages.
Imprimer la page
Cooking positions
$
Single cooking position
Always use the suitable size of cookware
Only use cookware that is suitable for induction cooking;
see the section entitled "Cooking with induction - Cook-
ware"
Special accessories
You can order the following accessories via your
specialist dealer:
VA 440 010
Stainless steel appliance cover
VA 420 000
Connection strip for combination with
other Vario 400 appliances for flush
installation
VA 420 001
Connection strip for combination with
other Vario 400 appliances for flush
installation with appliance cover/
extension
VA 420 010
Connection strip for combination with
other Vario 400 appliances for surface
installation
VA 420 011
Connection strip for combination with
other Vario 400 appliances for surface
installation with appliance cover/
extension
VA 450 400
Appliance extension, 38 cm
Only use the accessories as specified. The
manufacturer accepts no liability if these accessories
are used incorrectly.
Setting the cooktop
This section informs you how to set the cooking
positions. The settings table shows power levels and
cooking times for various meals.
Setting the power level
1
Press in the control knob and turn it to the
required power level (1-12 and booster function).
The corresponding cooking position indicator on
the cooktop flashes.
2
Place a suitable cookware item on the cooking
position within 90 seconds.
The cooking position switches off automatically if
a pot is not detected. To return the cooking
position to operation, turn the control knob to 0
and set the power level again.
3
When the cooking position is heating, the
cooking position indicator and the illuminated
ring behind the control knob light up
continuously.
Switching off the appliance
To switch of the cooktop, turn all control knobs to the
0 position.
The residual heat indicator in the knob's ring of a still
hot cooking position flashes slowly until the cooking
position has cooled down.
9