Great Lakes Case & Cabinet GL840EZ-3042 Manuel d'instructions d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Great Lakes Case & Cabinet GL840EZ-3042. Great Lakes Case & Cabinet GL840EZ-3042 16 pages. Ez seismic enclosure

Imprimer la page

ToP PaneL MounTinG

The top panel of the enclosure is

installed at the manufacturer.

Removing the top panel can

be done by removing the four

#10-32 x 1/2" lg screws.

Then simply lift the top

panel out or off.

There are 6 top panel options (The TPES-S Solid Top Panel is standard)

for the EZ Enclsoure:

tPeS-S

tPeS-P

Solid

Perforated

Standard

RaiL adJuSTMenT

The EZ enclosure comes standard with 19" 310-E compliant, 3/8"

SQ hole mounting rails. These rails are fully adjustable front to back.

To adjust rails, loosen the ¼-20 hardware using a 3/8" socket and

slide them to the desired position. (There are "tabs" in the horizontal

mounting brackets – if adjustment is required past these tabs, loosen

and remove the hardware then reinstall)

1/4 - 20 Locking

Flange Nut

top & bottom rail mounting

tPeS-f

three,

75 Cfm fans Cfm fan

1/4 - 20 Hex

Head Bolt

1/4 - 20

Carrige Bolt

#10-32 x 1/2"

Pan Head

Screws

tPeS-f10

one, 10" 550 two, 10" 550 Grommet

1/4 - 20 Sliding

Nut Plate

Center rail mounting

tPeS-2f10

tPeS-b

Cfm fans

brush