Dynabrade 51584 Sécurité, fonctionnement et entretien

Parcourez en ligne ou téléchargez le pdf Sécurité, fonctionnement et entretien pour {nom_de_la_catégorie} Dynabrade 51584. Dynabrade 51584 4 pages. 7"–8" random orbital polisher electronic variable

Imprimer la page

7"–8" Random Orbital

Polisher

Electronic Variable

Speed

Model:

51584 - 0-3,000 RPM Dial

- Variable Speed On/Off Switch

- 120V, 11 Amp

- 5/8"-11 Male Thread

Read and understand this tool manual before operating your tool. Follow all safety rules for the protection of operating

personnel as well as adjacent areas. For safety information, refer to Code of Federal Regulation – CFR 29 Part 1910,

Safety Requirements and applicable State and Local Regulations.

Read and understand tool manual before

work starts to reduce risk of injury to

operator, visitors, and tool.

Eye protection must be worn

at all times, eye protection to

conform to ANSI Z87.1.

Respiratory protection to be used when

exposed to contaminants that exceed the

applicable threshold limit values required by law.

Some dust created by grinding, drilling, sanding, and other construction activities contain chemicals known to cause cancer, birth defects

or other reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints

• Crystalline silica from bricks and cement and other masonry products

• Arsenic and chromium from chemically treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Caution: Hand, wrist and arm injury may result from repetitive work, motion and overexposure to vibration.

Tool Intent: Dynabrade 8" Random Orbital Polisher for polishing paint finishes, acrylics, wood, etc.

WARNING

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work Area safety

1. Keep your work area clean and well lit. Cluttered or dark areas invite accidents.

2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which ignite

the dust or fumes.

3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your

body is earthed or grounded.

Tool Manual – Safety, Operation and Maintenance

SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL

WARNING

SAFETY LEGEND

WARNING

GENERAL POWER TOOL SAFETY WARNINGS

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE

(Continued on Page 2)

WARNING

Practice safety requirements. Work alert,

have proper attire, and do not operate tools

under the influence of alcohol or drugs.

WARNING

Ear protection to be worn when exposure to sound,

exceeds the limits of applicable Federal, State or

local statues, ordinances and/or regulations.

WARNING

Electric shock hazard. Avoid bodily contact

with grounded objects, bodies of water.

Do not damage cord set.

WARNING

For Serial No. 09F1000 and Higher

Parts Page Reorder No. PD09•29

Effective February, 2009

Supersedes PD09•06