Great Life Healthcare Universal Therapy System Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Great Life Healthcare Universal Therapy System. Great Life Healthcare Universal Therapy System 18 pages.
Imprimer la page
5. SYSTEM CONTROL
Item Description
1
POWER Switch – Power On (Green LED), Standby (Amber LED)
2
AUTO Weight Detection function – Enabled by pressing the "Auto" button and will self-adjust the
comfort level according to patient's weight.
NOTE: The "AUTO" detection mode will be disabled when comfort level is manually adjusted. Press
"AUTO" again to re-activate the automatic weight detection when needed. It will detect around 10
minutes to achieve suggested comfort level based on patient's weight.
3
MODE – Cycle through Auto Firm (AF), Alternating (AL) and Static (ST) therapy modes by repeatedly
pressing the "Mode" button – the pump is set to alternating mode by default with "AL" display on
LED window. UTS is programmed to default back to alternating mode after 30 minutes of usage.
Auto Firm (AF)- Fast inflates the mattress to maximum pressure in static mode to perform nursing
procedures. It is programmed to return to alternating mode after 30 minutes of usage by default.
Alternating (AL) - To inflate mattress in alternating mode
Static (ST) - To inflate the mattress to a static surface. The pump will default back to alternating
mode after 30 minutes.
4
LEVEL – Allows for manual adjustment, by repeatedly pressing "LEVEL" button to accommodate an
individual's comfort if needed. Default manual setting will be the level detected during "Auto" mode,
or at Level 02 if Auto detection is incomplete. Display of "LEVEL" will automatically go back to
"MODE" when not in operation for 10 seconds.
5
Alarm Codes Display Window - "PF" stands for Power Failure, displayed in LED window with an
audio alarm to indicate a power outage situation. "LP" stands for Low Pressure, where the system
will alert user with a visual alarm displayed in LED display window, and an audible alarm triggered 5
minutes after visual alarm. (Check)
6
Lock/Unlock/ Alarm Mute Button - Lock/Unlock button allows user to manually lock (3 seconds)
/unlock (3 seconds) the control panel to safeguard against any undesired/accidental changes to the
settings. Control panel will auto lock when system is not in operation for 5 minutes.
Alarm Mute – Press to mute the audio alarm. The alarm will re-activate after 20 minutes if the
problem is not resolved. (Check)
5