Hi-Link HLK-RM04 Manuel d'application - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'application pour {nom_de_la_catégorie} Hi-Link HLK-RM04. Hi-Link HLK-RM04 12 pages. Serial to ehthernet
Également pour Hi-Link HLK-RM04 : Manuel de l'utilisateur (5 pages), Manuel de l'utilisateur (18 pages)

Imprimer la page

Method

Method one

one

one：Configuration

Configuration through

Configuration

Firstly, please ensure that the module is in default mode.The method of restoring the factory

settings: power-on the module, wait 35 seconds. Then press one of the buttons on the test

board and hold on more than 6 seconds.

Power-on the module again, wait 35 seconds until the light on the module blinking, and then

connect the DB9 serial port with the computer's serial port in a straight line. Or connect the test

board directly with a USB to serial cable as the following picture:

Press the "Exit transparent transmission / Preset" button, open the configuration software,

select the serial number, click on the search button, If there appears message >: at (: Found

Device at COM8 (115200)! In the respose area, it means the module is found.

深圳市海凌科电子有限公司 Shenzhen

Http://www.hlktech.com

through

through Serial

through

Serial

Serial port

port

Shenzhen

Shenzhen Hi-Link

Hi-Link Electronic

Hi-Link

Electronic Co.,Ltd

Electronic

Shenzhen

Shenzhen Hi-Link

Hi-Link

Hi-Link Electronic

Tel:0755-83575155 Fax:0755-83575189

Co.,Ltd

Electronic

Electronic Co.,Ltd

Electronic

Co.,Ltd