Hi-Link HLK-RM04 Manuel d'application - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'application pour {nom_de_la_catégorie} Hi-Link HLK-RM04. Hi-Link HLK-RM04 12 pages. Serial to ehthernet
Également pour Hi-Link HLK-RM04 : Manuel de l'utilisateur (5 pages), Manuel de l'utilisateur (18 pages)

Hi-Link HLK-RM04 Manuel d'application
Method
Method
Method
Method one
one
one
one:Configuration
Configuration through
Configuration
Configuration
1.
Firstly, please ensure that the module is in default mode.The method of restoring the factory
settings: power-on the module, wait 35 seconds. Then press one of the buttons on the test
board and hold on more than 6 seconds.
2.
Power-on the module again, wait 35 seconds until the light on the module blinking, and then
connect the DB9 serial port with the computer's serial port in a straight line. Or connect the test
board directly with a USB to serial cable as the following picture:
3.
Press the "Exit transparent transmission / Preset" button, open the configuration software,
select the serial number, click on the search button, If there appears message >: at (: Found
Device at COM8 (115200)! In the respose area, it means the module is found.
深圳市海凌科电子有限公司 Shenzhen
Http://www.hlktech.com
through
through Serial
through
Serial
Serial
Serial port
port
port
port
Shenzhen
Shenzhen
Shenzhen
Shenzhen Hi-Link
Hi-Link Electronic
Hi-Link
Hi-Link
Electronic Co.,Ltd
Electronic
Electronic
Shenzhen
Shenzhen
Shenzhen Hi-Link
Hi-Link
Hi-Link
Hi-Link Electronic
Tel:0755-83575155 Fax:0755-83575189
Co.,Ltd
Co.,Ltd
Co.,Ltd
Electronic
Electronic Co.,Ltd
Electronic
Co.,Ltd
Co.,Ltd
Co.,Ltd