Aircon Off SMART REMOTE Instructions d'installation et manuel d'utilisation - Page 6
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel d'utilisation pour {nom_de_la_catégorie} Aircon Off SMART REMOTE. Aircon Off SMART REMOTE 8 pages. Universal ac remote control with power saving
Également pour Aircon Off SMART REMOTE : Manuel de l'utilisateur (6 pages)
Imprimer la page
Troubleshooting
Blank Screen. Dim Screen, or if your Remote is not responding
First change batteries. (Never mix new and old batteries together) If after changing
batteries the screen stays blank, the remote needs to be reset/rebooted. Reset the unit by
pressing the recessed "RESET" button on the keypad with a blunt point like a pencil or
pen.
Do not use a sharp point like a pin.
The remote will not lose its settings when you change batteries or if you use the reset
button, but you may need to reset the clock.
Incorrect LCD Display or Unusual Operation.
Reset the unit by pressing the recessed "RESET" button on the keypad with a blunt point
like a pencil. Do not use a sharp point like a pin. The remote will not lose its settings when
you use the reset button but you may need to reset the clock.
During Set Up if the Smart Remote is not operating the AC correctly or if
the AC won't turn "Off"
Some codes are quite similar. During Set Up the AC may recognise a "partial" Code and
you may find that only some functions will work correctly.
In that case continue pairing steps I and 2 until the correct code is found. If a particular
code turns the AC 'On' but not 'Off' it may be necessary to turn the AC "Off" by using the
AC's original remote if available. Alternatively turn the unit off by using the Emergency "Off"
push button (usually located under the filter cover on the front of the AC wall unit. (Please
refer to your AC owners manual). Or you may turn the power supply to the AC "Off" and
"On" again via the mains supply or circuit breaker. Once the AC is back in standby mode
continue the code search. Repeat Pairing steps 1 and 2 until the correct code is found and
the AC works normally.
During Set Up Keypad Inputs Not Working
If the keypad does not respond to a setting input it may be because the keypad has
become locked, If necessary unlock the Set Up Function again.
Technical Specifications:
Controllable distance: Greater than 8 meters Power supply voltage: DC 3 V
Battery model: Battery 2 x AAA (UM-4 , R03) Dimension: L 165mm x W55mm x D25mm
Weight: Approx 100g (excl. Batteries)
THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES AND/OR
IMPROVEMENTS IN DESIGN, FORM & FUNCTION AT ANY TIME WITHOUT NOTICE AND
WITHOUT INCURRING OBLIGATION.
6