Great Little Trading L2985 Northcote Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Great Little Trading L2985 Northcote. Great Little Trading L2985 Northcote 13 pages. Tall open base & shelf unit

Imprimer la page
Assembly: Open Base Unit
A
left
STEP 1:
Hardware for Step 1:
Lay the 2x side panels (A) on a clean flat surface with the
drill holes and groove facing up, in the position shown.
Insert 8x wooden dowels (#3) into the larger drill holes
of BOTH panels (A) as shown above. Ensure they are
12x #1 Cam Dowels
pushed in as far as they will go.
Insert 6x cam dowels (#1) into the drill holes next to
the wooden dowels on BOTH panels (A), tighten with a
screwdriver.
16x #3 Wooden Dowels
#1
#3
A
right
#1
#3
B
Hardware for Step 2:
12x #1 Cam Dowels
16x #3 Wooden Dowels
8x #2 Cam Locks
4
C
Ensure that each cam
lock's arrow is pointing
towards the drill hole on the
side edge of the
component.
STEP 2:
Lay the top panel (B) and base panel (C) on a clean, flat
surface with the large circular drill holes facing up.
Insert 4x cam locks (#2) into BOTH panels. Position
the arrows on the cam locks to be facing towards the
smaller drill holes on the side edges of the panels.
Insert 2x wooden dowels (#3) into the larger drillholes
on top panel (B) as shown above. Ensure they are
pushed in as far as they will go.
Insert 2x cam dowels (#1) into the drillholes next to
the wooden dowels, tighten with a screwdriver.
#2