Great Little Trading L4469 Manuel d'instructions de montage - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Great Little Trading L4469. Great Little Trading L4469 11 pages. Toy box base unit & top shelf
Imprimer la page
Component Check List
#1
19x Cam Dowels
35mmL
#3
19x Cam Locks
15mmL dia
#5
12x Flat Head Screws
14mmL
#7
2x L-Shaped Drawer Runners
(for drawer)
#9
4x Flat Ended Screws
24mmL
#11
1x Anti- Tip Kit
#2
18x Wooden Dowels
25mmL
#4
12x Domed Head Screws
14mmL
#6
2x Flat Drawer Runners
(for Toy Box Surround)
#8
2x Handles
#10
4x Screws
30mmL
You will need
(not supplied)
Philips Head Screwdriver
STEP 1:
Build the Top Shelf first.
Using a Phillips screwdriver, insert 1x cam dowel (#1) in the central hole of
panel A. Add 2x wooden dowels (#2) in the remaining holes and join panels A
& B together.
Insert 1x cam lock (#3) in the central hole of panel B and turn clockwise to
lock.
NOTE: The large drill holes on the panel A to be facing the floor and they
should be facing outwards on panel B. This will ensure they are not seen once
the unit is finished.
#1
#2
A
#2
Hardware for Step 1:
2x #2 Wooden Dowels
1x #1 Cam Dowels
1x #3 Cam Locks
4
B
#2
IMPORTANT: Make sure that the
small drill holes on the edge of panel A
#3
are next to the connection to panel B -
#1
they will be needed at a later step.
#3
Using Cam Locks:
When inserting into the panel, ensure that each cam lock's
arrow is pointing towards the drill hole on the side edge
of the panel & the dowel that it will be receiving.
When the panels are in the connected position, using a
screwdriver, turn the cam lock in a clockwise direction to
lock and secure.