DAY 6 Bicycle Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} DAY 6 Bicycle. DAY 6 Bicycle 16 pages. Bicycle

Day 6 Bicycles - Assembly Instructions

12.Tighten bolt firmly until the front wheel, bearings, and fork are secure.

NOTE: DO NOT OVERTIGHTEN the bolt.

This could pull the nut out of the fork. (You don't

enough to allow the front wh eel to turn but not so loose that you can feel and/or hear them if you

dropped the bike on its tires from 6".

13. Place rubber cap inside of bolt head.

Parts are shown in order they are placed on fork.

1. Slide thin rubber washer over fork so it sits

on chrome ring at base.

2. Place bearing on thin rubber washer –

round balls pointing up.

3. Slide fork with just the bearing and thin

rubber washer through head tube.

4. Place other bearing over fork –

round balls facing down

5. Place heavy chrome ring over bearing

6. Place thicker rubber washer over chrome

ring – flat side up (pointed side down)

7. Place thin steel washer over rubber washer

8. Place two 5mm spacers over steel washer

9. Place stem on top of spacer(s)

10. Place cap with hole on top of stem

11. Place bolt through hole in the cap and

thread into the (starfangled) nut inside the fork.

1:1

want that to happen) Be arings should be loose