Gaggenau AW 27 Manuel de l'utilisateur et instructions d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur et instructions d'installation pour {nom_de_la_catégorie} Gaggenau AW 27. Gaggenau AW 27 20 pages. Extractor hood
Imprimer la page
en Familiarising yourself with your appliance
5 Familiarising yourself with your appliance
5.1 Controls
You can use the controls to configure all functions of your appliance and to obtain information about the operating
status.
Switching the appliance on or off
Switching on fan setting 1
Switching on fan setting 2
Switching on fan setting 3
Switching intensive mode on or off
Switching the intermittent ventilation on or off
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Setting an operating mode
Your appliance is set to air extraction mode by default.
Note: When using it in circulating-air mode, you require
additional accessories.
7 Basic operation
7.1 Switching on the appliance
Press
.
▶
a The appliance starts at fan setting 2.
7.2 Switching off the appliance
Press
.
▶
7.3 Setting a fan setting
Press , or .
▶
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
Press
.
▶
a After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
7.5 Switching off intensive mode
Press
.
▶
6
Switching on automatic mode
Resetting the filter saturation indicator
Hob-based ventilation control
Switching Ambient Light on or off
Switching the lighting on or off
Setting the brightness
When using it in circulating-air mode, set the operat-
▶
ing mode.
7.6 Switching on intermittent ventilation
In order to regularly ventilate your kitchen, you can use
the interval ventilation. With interval ventilation, the vent-
ilation system switches on and off in the selected set-
ting for the selected time.
Press
.
▶
a The appliance runs for approx. six minutes per hour
at fan setting 1.
7.7 Switching on automatic mode
The optimum fan setting is set automatically using a
sensor.
Press .
▶
7.8 Switching off automatic mode
Press , or .
▶
a The ventilation is automatically ended when the
sensor detects no further change in the room air
quality.
a Automatic mode runs for a maximum of four hours.