Gaggenau AW270192 Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Gaggenau AW270192. Gaggenau AW270192 20 pages.
Imprimer la page
6.11 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
Note: Colour temperature settings are available in the
Home Connect app provided the appliance has this
function.
Press
.
▶
6.12 Setting the brightness
Press and hold
until the required brightness is
▶
reached.
6.13 Switching on Ambient Light
You can switch on the Ambient Light independently of
the ventilation system.
Press
.
▶
6.14 Ambient Light
brightness
Press and hold
until the required brightness is
▶
reached.
6.15 Ambient Light
colour
Requirement: The appliance is switched off.
Press
.
1.
Press
or
repeatedly until the required colour is
2.
set.
6.16 Setting the intermediate position for
the filter cover
On some appliances, the filter cover can be adjusted to
an intermediate position. The intermediate position can
be used to eliminate particularly strong cooking smells
and large amounts of steam.
Take hold of the filter cover in the centre and open it
▶
carefully.
6.17 Resetting the saturation indicator
After cleaning the grease filter or after changing the
odour filter, the saturation indicator can be reset.
Requirements
¡ After the appliance has been switched off,
appears on the display for the grease filter.
¡ After the appliance has been switched off,
appears on the display for the odour filter.
¡ After the appliance has been switched off,
appears on the display for the grease filter and
odour filter.
Press and hold
.
▶
a The saturation indicator is reset.
1
Depending on the appliance specifications
1
1
- Setting the
1
- adjusting the
and 1
and 2
and 3
6.18 Setting the saturation indicator
The saturation indicator must be adjusted depending
on the filter used.
Requirement: The appliance is switched off.
Press and hold
.
1.
To set circulating-air mode (non-regenerable fil-
‒
ter), press .
To set circulating-air mode (regenerable filter),
‒
press .
To set the air extraction mode, press .
‒
To save the setting, press and hold
2.
6.19 Switching on the audible signal
Requirement: The appliance is switched off.
To open the setting, press
1.
To switch on the audible signal, press .
2.
To save the setting, briefly press and hold
3.
.
a A signal tone sounds as soon as the selected set-
ting is saved.
6.20 Switching the signal tone off
Requirement: The appliance is switched off.
To open the setting, press
1.
Press
to switch off the audible signal.
2.
To save the setting, briefly press and hold
3.
.
Basic operation en
briefly.
and
briefly.
and
and
briefly.
and
7