Agriframes 40548-TBK Manuel - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Agriframes 40548-TBK. Agriframes 40548-TBK 4 pages. Classic extra round gazebo matt black 2.4m
Imprimer la pageMove the Top section to the intended location...
13. Move the Gazebo top to where the structure will be installed and firmly
push the structure into the ground to make an impression or mark in
the ground. These impressions indicate where the uprights need to be
inserted.
14. Remove the Gazebo top, using the Hole Maker create holes 15" deep,
where you have marked the ground. Ensure the holes are vertical and
to the same depth.
Insert the Uprights...
15. Tap an end plug into the non-reduced end of the 84" uprights.
16. Insert an upright into the holes, ensure that the uprights stand vertical
and are level to one another.
17. Attach 2 spacer bars to each of the uprights. The lower spacer bar
should be positioned 8" above ground level, then position the other
spacer bar 50" above the lower spacer bar, as shown in Figure 6.
18. Slide a moisture seal onto the reduced end of the upright.
Lift the Top of the Gazebo onto the uprights...
19. Lift the constructed Gazebo Top onto the uprights, ensure that the Gazebo
Top is lowered evenly onto the uprights.
20. Cover the Joins with moisture seals.
Final checks...
21. Check that all of the joins have been covered by moisture seals.
22. Ensure that all of the connectors have been tightened and are fully secured.
Optional Component: Fixing the Bottom Lattice Section...
23. Take the lattice panels and the Lattice Ties.
24. Secure the 4 x 4 lattice panels between the spacer bars on the top section of the Gazebo, using the
lattice ties.
25. Secure the 5 x 4 lattice panels between the spacer bars on the uprights of the Gazebo, using the
lattice ties.
•
Ensure that the panels are centered within each bay.
•
Please Note: you may need to slightly bend the lattice panel to form a curve in the line.
26. Trim the ends of the lattice ties.
If you have any questions regarding assembly please call our
customer service team on 0117 934 1790
Agriframes, Journal house, Hartcliffe Way, Bristol, BS3 5RJ
Orderline: 0117 934 1790 Fax: 0117 934 17 91
Order on-line: www.agriframes.co.uk
Figure 6: Position of the
Spacer Bars