Dynabrade 52681 Manuel de sécurité, d'utilisation et d'entretien - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de sécurité, d'utilisation et d'entretien pour {nom_de_la_catégorie} Dynabrade 52681. Dynabrade 52681 8 pages. 1hp die grinder
Imprimer la page
®
Dynaswivel
•
Swivels 360° AT TWO PIVOT POINTS allowing the air hose to
drop directly to the floor while providing superb tool handling.
95461 – 3/8" NPT.
51989 Repair Collar
•
Specially designed collar for use in vise to prevent damage
to valve body of tool during disassembly/assembly.
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
•
Prevents rust and formation of sludge.
•
Keeps pneumatic tools operating longer
with greater power and less down time.
95842: 1pt. (473 ml)
95843: 1gal. (3.8 L)
53163 Handle Assembly
53199 Collar
Bearing Press Tools
•
Used to install bearings.
96243: For installing 02057 Bearing.
96244: For installing 01007 & 54520 Bearings.
96005 Male Plug
•
Provides up to twice the air flow
compared to standard plug design.
•
Plug has "ported" design to prevent
"starving" of the air tool.
95542 Grease 10 oz.
•
Workable range 0˚F to 300˚F.
•
High film strength; excellent resistance to water, steam, etc.
95541 Push-type Grease Gun
•
One-hand operation.
Reference Contact Information
1. American National Safety Institute – ANSI
25 West 43
rd
Street
Fourth Floor
New York, NY 10036
Tel: 1 (212) 642-4900
Fax: 1 (212) 398-0023
2. Government Printing Office – GPO
Superintendent of Documents
Attn. New Orders
P.O. Box 371954
Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
3. European Committee for Standardization
Rue de Stassart 36
B - 1050 Brussels, Belgium
Visit Our Web Site: www.dynabrade.com
DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1490 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
© DYNABRADE, INC., 2004
Optional Accessories
Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1
Email: [email protected]
96532 Motor Tune-Up Kit
•
Includes assorted parts to help maintain
and repair motor.
01904 Drop-In Motor (950 RPM)
01888 Drop-In Motor (1,800 RPM)
01887 Drop-In Motor (4,500 RPM)
•
Allows quick and easy replacement.
No motor adjustments needed.
Carbide Burr Kits
•
Includes 12 burrs for grinding,
deburring and finishing metal.
93350 – 1/4" Kit
93380 – 6mm Kit
Collet Inserts
•
50013 – 1/4"
•
50014 – 3/8"
•
50016 – 6mm
•
50039 – 8mm
•
50066 – 1/4" Collet Assembly.
•
50073 – 6mm Collet Assembly.
53621 Over Hose Assembly
•
Over Hose Assembly directs exhaust
away from operator.
30335 Air Supply Hose
•
3/8 in. I.D. x 60 in. Wide air supply
hose, includes: 3/8 in. NPT male and
female threaded fittings.
Composite-Style Coupler
•
Lightweight 1.4 oz. (.05 Kg), non-marring
composite material.
•
Easy connect/disconnect by single
push-button action.
•
Shock-proof, low-vibration, crush-resistant.
94960: 1/4" Female NPT
94980: 1/4" Male NPT
95262 – 14mm open-end.
95281 – 19mm open-end.
96209 Motor Repair Clamp
•
Specially designed clamp to secure motor
cylinder before disassembly.
Special Repair Tools Used
(Not Pictured)
96346 – Bearing Separator
96232 – Arbor Press
DYNABRADE
PRINTED IN USA
®