Hi-Tech SMART GUARD Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Hi-Tech SMART GUARD. Hi-Tech SMART GUARD 14 pages.

ARM / DISARM

Technical problem

Doorbell zone

triggering

Fire alarm

2. ARM and DISARM

In this mode, all zones from the selected area(s) will be monitor and

alarm will generate if any of the zones is trigger. System is ready to arm

only if all zones are closed and the ARM status indicator lights in green.

Entering a valid user code and selecting desired area number from 1 to

8 will activate its FULL ARM mode.

User code

Arming will start by counting the exit time with audible signal (short

beeps) and flashing the ARM status indicator in red. In the last few

seconds, the beeps will speed up. Exit time will end with the ARM tone -

three consecutive beeps, where the last is longer and the ARM status

indicator lights steadily red.

If the user has permissions for only one area, the system will skip

asking for its number and will go directly to the exit time.

GPS SYSTEMS BULGARIA

www.smart-hitech.eu

Three consecutive beeps, where the last is

longer.

A single short beep and the dedicated indicator

starts blinking.

Short fading beeps informing the triggering of an

"entry" zone (only in disarmed area).

Repeating beeps informing the triggering of fire

zone.

FULL ARM

 +359 700 20 820, +359 887376336

4004 Plovdiv 75A D. Talev Str

Area number

5 / 14

Exit time