Dynabrade 52861 Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dynabrade 52861. Dynabrade 52861 8 pages. 25,000 rpm pencil grinder

Imprimer la page

Note: Reprinted with permission of United Abrasives Manufacturers Association From (ANSI B7.1). For more information on other type mounted wheels refer

to (ANSI B7.1) Safety requirements for use, care and protection of Abrasive wheels.

Changing A Collet Insert/Accessory:

1. Disconnect tool from power source.

2. Remove the collet cover with grip from the

52885 Housing by turning it counterclockwise.

3. Use the 96076 Wrench (12mm) to hold the 01435 Collet

Body stationary while using the 95262 Wrench (14mm) to

loosen the 01484 Collet Cap by turning it counterclockwise.

4. Insert desired bit into collet insert a minimum of one inch or

at least half the overall length of the accessory and tighten 01484

Collet Cap using 95262 Wrench (14mm) while holding 01435

Collet Body stationary using 96076 Wrench (12mm).

Note: See table 27 above for overhang limits for plain

wheels (Group W).

5. Attach collet cover with grip onto 52885 Housing

by turning it clockwise.

Pencil Grinder Reference Tables

Collet Insert/Accessory Mounting Instructions

Collet Insert

Collet Cap

Collet Cover

Housing

Collet Body