DAYLIFF AQUASTRONG CIRC 16 Manuel d'installation et d'utilisation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} DAYLIFF AQUASTRONG CIRC 16. DAYLIFF AQUASTRONG CIRC 16 17 pages. Smart inline boosting pumps
Imprimer la page
81mm
Weight: 1.2Kg
2. WARNINGS AND SYMBOLS
The pump must not be installed against wood or any
other material which may be affected by heat from the
pump.
WARNING
Before installing the pump ensure all soldering/welding
adjacent to the pump is complete, the system has been
thoroughly ushed out to remove any foreign matter and
WARNING
that vent and feed pipes are positioned so that the pump
will not draw in air or over pump.
The pump should not be installed in either a high point in
the system where air can collect or a low point where
sediments could build up.
WARNING
Pipes on both sides of the pump should be supported to
reduce strain and must be correctly aligned prior to
installing the pump to reduce the risk of scalding.
WARNING
Check the direction of ow indicated by an arrow on the
pump casing and install the pump between the isolating
valves. When replacing a pump maintain the same
WARNING
direction of ow.
Do not leave system empty without protection from
corrosion. Ensure to use quality corrosion inhibitors.
WARNING
140mm
3
155mm
110mm