Hi-Tech Diamond All-U-Need Glass/Crystal Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Hi-Tech Diamond All-U-Need Glass/Crystal. Hi-Tech Diamond All-U-Need Glass/Crystal 16 pages.

Imprimer la page

SAFETY INSTRUCTIONS

• Always wear proper eye protection to protect

you from any debris that may fly out while

grinding. We recommend wearing safety goggles

or safety glasses with side shields. Everyday

glasses are not safety glasses. If anyone is around

the machine while it is in use, they must wear

safety glasses.

• Keep work area well lit and clean. Make sure

your work area is not cluttered.

• Do not operate unattended. Adult supervision

is required at all times. Never leave the machine

running unattended.

• Do not operate this machine while under the

influence of drugs, alcohol or any medication.

• Never run discs dry. Make sure there is

adequate water used while grinding so that

rock dust is not formed. This dust contains

chemicals that can be hazardous to your lungs

if inhaled and is known to cause cancer, birth

defects or other reproductive harm. To reduce

your exposure to these chemicals, work in a well

ventilated area and wear a face or dust mask if

the grinding operation is dusty.

• Use only water as a coolant.

• Never grind more than one workpiece at a

time.

• Some rocks contain poisonous elements.

Avoid grinding rocks that contain uranium,

mercury, lead, arsenic, etc. Make sure you know

the material you are grinding.

• Do not allow water to run down the shaft

and into the motor. This will cause the motor to

instantly burn out. This machine is designed in such

a way that this does not occur with normal use.

• Do not allow the water level to build up in the

catch tray. Make sure the drainage hole is open

so water does not back-up in the catch tray and

possibly leak down the motor shaft.

• Do not force the tool or attachment to do a job

it is not designed to do.

• Discs continue to spin after turn off,

eventually slowing to a stop.

• Avoid awkward operations and hand

positions. Make sure you have good balance

while working on this machine. A sudden slip

could cause your hand to move into the disc.

MAINTENANCE

• Always disconnect from power before

servicing. Disconnect machine from power

source before making any adjustments and when

not in use.

• Do not abuse the power cord. Never carry

the machine by the cord or yank it to disconnect

from receptacle. Keep cord away from heat, oil

and sharp edges.

• Do not open the black cone body. There are no

user serviceable parts inside.

• Clean and dry machine after use.