Hi-Tech Diamond 31-001 Manuel d'instruction - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Hi-Tech Diamond 31-001. Hi-Tech Diamond 31-001 16 pages. 10" slab saw

Imprimer la page
What lubricants can I use with this
slab saw?
This slab saw machine is designed to be
operated with oil or water. We recommend
water because it is less messy to work with than
oil. If you are using water as a lubricant, we
suggest adding a coolant to reduce heat buildup
between the saw blade and stone. Some stones,
such as tourmaline for example, fracture with
too much heat. No one likes a fractured stone!
How large should the material be
that I'm cutting?
This slab saw is to be used for slabbing larger
material. The rocks and glass you are cutting
should never exceed more than 2/3 the size of
the visible cutting area of the saw blade. The
blade height of the 10" slab saw is 3-3/4". This
measurement is taken from the saw table to the
top of the saw blade (see below).
14

FAQS

What size saw blades can I use on
this slab saw?
Only use 10" diameter saw blades on this slab saw
machine. Please note that only saw blades with
5/8" arbor holes fit onto the saw arbor.
In regards to saw blades, what do
"core" and "kerf" mean?
Core is the thickness of the inside of the saw
blade (the core), while kerf is the thickness of the
saw blade's rim. When purchasing a saw blade,
the dimension of the kerf is what matters most
because the kerf determines how thick of a cut you
will get. FYI - the kerf gets thinner over time as the
saw blade wears away with continuous cutting.
Kerf
What is the recommended RPM for
this slab saw?
The RPM speed depends on the type of saw blade
you are using and the saw blade's maximum
RPM. Remember to never exceed the maximum
RPM of your saw blade.
Core