Hi-Velocity HE PS Manuel d'installation et d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Hi-Velocity HE PS. Hi-Velocity HE PS 8 pages.

Imprimer la page

Service

The Hi-Velocity Air Purification System comes with a

built-in Remote Mounted Service Panel to automatically

keep track of service intervals. (Fig. 11) Indicator lights

will tell you when to change the filter and ultraviolet

lamps 30 days in advance.

MERV-13 Filter: Change every 6 months - service light

turns from

green to yellow after five months and to red after six

months.

Ultraviolet Lamps: Change every 12 months - service

light turns from green to yellow after eleven months and

to red after twelve months.

Replacement Filters and Ultraviolet Lamps

Replacement components are available in the form of a

replacement kit containing (2) filters and (1) set of UV

lamps. Replacement kits are available from your local

HVAC wholesaler or contractor.

Operation

The Hi-Velocity Air Purification System installs in the

air-inlet side of the Hi-Velocity unit up to five tons in size.

Only operation of the air-handler fan unit is required for

air purification and sterilization to take place.

Note: The ultraviolet lamps are wired to operate

continuously. This feature allows the catalyst to burn off

surface impurities, cleaning and reactivating itself during

periods of non-use or no airflow.

The HE PS System combines three unique technologies

to protect people against indoor air pollutants.

Photocatalytic Oxidation (PCO) technology combined

with high efficiency electrostatic MERV-13 particulate

filtration and germicidal ultraviolet light quickly

reduces and eliminates toxic gasphase chemicals, lung

damaging dust and airborne germs from the living

environment.

Many new homes have smart programmable thermostats

that allow for automatic operation of the air-handler

fan unit when there is no demand for heating or air

conditioning. It is important that the HE PS is operating

at least (30) minutes per hour (24) hours per day to

remove toxic materials from the indoor environment.

The length of operation depends on the location of the

home or office in relation to point source pollution such

as refineries, processing plants, automobile traffic and

areas that produce high levels of pollen. Individuals that

are sensitive to mold spores, dust mites, chemicals or

have respiratory problems such as asthma, emphysema,

and chronic allergies should extend the run time to (40)

minutes or more per hour.

Resetting Service Lights

On the right side of the service panel, there are arrows

pointing to two small holes marked reset. One is marked

filter and one is marked lamp (Fig 11). Using a small paper

clip, bend out one leg straight and insert the end of the

paper clip into only the hole corresponding to the replaced

component and push lightly until the service light returns

to the green position. The computer is now reset.

Fig. 11 Service Panel

(4)

PRESS HERE

TO RESET