ADEMCO Ademco VISTA-20P Manuel de programmation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de programmation pour {nom_de_la_catégorie} ADEMCO Ademco VISTA-20P. ADEMCO Ademco VISTA-20P 17 pages. Programming auto arming and disarming schedules
Également pour ADEMCO Ademco VISTA-20P : Manuel d'installation rapide (2 pages), Manuel de l'utilisateur (20 pages), Manuel de programmation (17 pages), Manuel de démarrage rapide (6 pages), Manuel d'installation rapide (2 pages), Manuel d'installation rapide (2 pages), Manuel de programmation (2 pages), Manuel rapide (2 pages)

Imprimer la page

ADEMCO Ademco VISTA-20P Manuel de programmation

∗ ∗ ∗ ∗ 88

Program Mode Lockout Options

0 = standard *98 installer code lockout (reentry only by [∗] + [#] within

50 seconds after power up)

1 = lockout [∗] + [#] reentry after *98 exit (reenter via installer code or

downloader only)

2 = not used

3 = lockout local programming after *98 exit (reenter by downloader only)

∗ ∗ ∗ ∗ 89

Event Log Full Report Code

See box above field *59 for report code entries.

∗ ∗ ∗ ∗ 90

Event Log Enables

NOTE : System messages are logged when any non-zero entry is made.

0 = None; 1 = Alarm/Alarm Restore

2 = Trouble/Trouble Restore;

4 = Bypass/Bypass Restore;

8 = Open/Close. Example: To select "Alarm/Alarm Restore", and

"Open/Close", enter 9 (1 + 8); To select all, enter #15.

∗ ∗ ∗ ∗ 91

Option Selection

Options: 0 = None

4 = AAV UL: must use ADEMCO UVCM module

8 = Exit Delay Restart/Reset UL: must be disabled

#+12 = AAV and Exit Delay Restart/Reset

SIA Guidelines: Exit Delay should be enabled.

V20PSIA/V15PSIA:

Options: Same as listed above.

Call Waiting Disable:

0 = call waiting not used

1 = call waiting disable digits (*70) entered in field *40; (when

selected, the system dials the entry in field *40 only on

alternate dial attempts; this allows proper dialing in the event

call waiting service is later canceled by the user).

∗ ∗ ∗ ∗ 92

Phone Line Monitor Enable

UL: see Inst. Instructions for requirements

NOTE: Output Device must either be programmed to be STOPPED in

field ✱80 or STOPPED by Code + # + 8 + output number.

Entry 1:: 0 = disabled, 1-15 = 1 min - 15 min

(#+10 = 10 min; #+11 = 11 min; #+12 = 12 min; #+13 = 13 min; #+14

= 14 min; #+15 = 15 min)

Entry 2:

0 = Keypad display when line is faulted

1 = Keypad display plus keypad trouble sound

2 = Same as "1", plus programmed output device STARTS. If either

partition is armed, external sounder activates also.

∗ ∗ ∗ ∗ 93

Reports In Armed Period

Per Zone

(Swinger Suppression)

Restrict Report Pairs:

0 = Unlimited Reports

1 = 1 report pair

2 = 2 report pairs

SIA Guidelines: Must be set for option 1 or 2.

V20PSIA/V15PSIA:

Restrict Report Pairs: 1 = 1 report pair; 2 = 2 report pairs

Unlimited Reports Enable:

0 = restrict reports to the setting in entry 1

1 = unlimited reports for zones listed in zone list 7; (use zone list 7

to enter those zones that require unlimited reporting; these

zones ignore the setting in entry 1)

DOWNLOAD INFORMATION ( ✱ 94, ✱ 95)

∗ ∗ ∗ ∗ 94

Download Phone No.

Enter up to 20 digits, 0–9; #+11 for ' ✱ '; #+12 for '#'; #+13 for a 2-

second pause. Do not fill unused spaces. If fewer than 20 digits, exit

field by pressing ✱ . To clear entries from field, press ✱ 94 ✱ .

UL: downloading may be performed only if a technician is at the site.

∗ ∗ ∗ ∗ 95

Ring Count For Downloading

NOTE: Do not enter "0" if using 4285/4286 Phone Module.

0 = Disable Station Initiated Download;

1–14 = number of rings (1–9, # +10 =10, # +11 =11,

# +12 =12, # +13 =13, # +14 =14);

15 = answering machine defeat (# +15 =15).

[0]

[00]

[3]

[8, 0]

Options

V20PSIA/V15PSI

Call Wait Disable

[0,0]

[1,0]

Restrict

V20PSIA/V15PSIA

Report Pairs

Unlimited

Reports Enable

[15]

∗ ∗ ∗ ∗ 96

, ∗ ∗ ∗ ∗ 97

Initialize/Reset Defaults

This is a command, not a data field. See page 2.

∗ ∗ ∗ ∗ 98

Exit Commands

, *99

This is a command, not a data field. See page 2.

PAGER OPTIONS (✱160- ✱172)

∗ ∗ ∗ ∗ 160

Pager 1 Phone No.

Enter up to 20 digits. 0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-sec pause

∗ ∗ ∗ ∗ 161

Pager 1 Characters

Enter the optional prefix characters, up to 16 digits.

0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.

∗ ∗ ∗ ∗ 162

Pager 1 Report Options

Part. 1 Part. 2 common

For each partition, select from the following options:

0 =

no reports sent

1 =

Opens/closes all users

4 =

All alarms and troubles

5 =

All alarms / troubles, and opens/closes for all users

12 = Alarms / troubles for zones entered in zone list 9

13 = Alarms / troubles for zones entered in zone list 9, and

opens/closes for all users

∗ ∗ ∗ ∗ 163

Pager 2 Phone No.

Enter up to 20 digits. 0–9; #+11 = 'Q'; #+12 = '#'; #+13 = 2-sec pause

∗ ∗ ∗ ∗ 164

Pager 2 Characters

Enter the optional prefix characters, up to 16 digits.

0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.

∗ ∗ ∗ ∗ 165

Pager 2 Report Options

Part. 1 Part. 2 common

See field *162 for reporting options. Select for each partition (use zone

list 10 if using options 12 or 13).

∗ ∗ ∗ ∗ 166

Pager 3 Phone No.

Enter up to 20 digits. 0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-sec pause

∗ ∗ ∗ ∗ 167

Pager 3 Characters

Enter the optional prefix characters, up to 16 digits.

0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.

∗ ∗ ∗ ∗ 168

Pager 3 Report Options

Part. 1 Part. 2 common

See field *162 for reporting options. Select for each partition (use zone

list 11 if using options 12 or 13).

∗ ∗ ∗ ∗ 169

Pager 4 Phone No.

Enter up to 20 digits. 0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-sec pause

∗ ∗ ∗ ∗ 170

Pager 4 Characters

Enter the optional prefix characters, up to 16 digits.

0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.

∗ ∗ ∗ ∗ 171

Pager 4 Report Options

Part. 1 Part. 2 common

See field *162 for reporting options. Select for each partition (use zone

list 12 if using options 12 or 13).

∗ ∗ ∗ ∗ 172

Pager Delay Option For Alarms

0 = none; 1 = 1 minute; 2 = 2 minutes; 3 = 3 minutes

This delay is for ALL pagers in the system.

– 5 –

[0,0,0]

0,0,0]

[0,0,0]

[3]