DYNABREEZE FA-23181 Manuel de l'utilisateur et garantie - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur et garantie pour {nom_de_la_catégorie} DYNABREEZE FA-23181. DYNABREEZE FA-23181 12 pages. Industrial 450mm caution: read the assembly & safety instructions before operating and retain for future reference wall fan
Également pour DYNABREEZE FA-23181 : Instruction Manuel de l'utilisateur et garantie (8 pages)
Imprimer la page
UNPACKING AND INSTALLING THE FAN
1. Unpack the unit from box that your
unit was purchased in and recycle the
packaging if possible.
2. Check that all the parts are included on
the unit and nothing is broken. If you
require assistance, please contact the
place of purchase.
3. Select a suitable spot on the wall (away
from curtains, draperies, or heat sources)
where you want to mount the fan and in
close proximity to the power supply.
4. The fan must be mounted vertically.
Suitable fixings must be used for
mounting to the wall and must support
a minimum of 8.5kg. Some masonry
plugs and screws are provided, check the
suitability to your installation before use.
5. To assist in mounting the fan, a wall
mounting drilling diagram is included
on the back page of this manual, so pre
drilling and fixing of the mounting screws
can be performed without having to hold
the fan in place to mark/drill.
6 DYNABREEZE INDUSTRIAL STRENGTH FAN
6. Once the 4 fixings are securely in place,
mount the fan over the screw heads and
slide down into position, so the screw
heads can't slip out of the mounting
bracket holes. (See Fig 2)
7. Unscrew the oscillation arm securing
bolt from the motor rotating arm, line
up the connecting rod and re-install the
oscillation securing bolt back into the
motor. (See Fig 3)
Fig 2
Fig 3
Motor
Oscillation Arm
Connecting Rod
Oscillation
Securing Bolt