Daymak Arsenal Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Daymak Arsenal. Daymak Arsenal 6 pages. Electric bicycle

INSTRUCTION

5. Maintenance and adjustments

5.1 Do not attempt to open the casing of the battery, motor, or regulator or all

warrantees will become void. If you experience a problem contact our service

department.

5.2 Wheel spokes should be adjusted after 6 months. Handlebar and saddle tubes

should never be on the nuts positioning the handlebar, handlebar vertical tube,

bicycle saddle, saddle tube and front wheels is 18NM. The minimum torque

on the nuts on the pedal bearing axle and rear wheel is 30NM.

5.3 If the chain becomes loose or frequently comes off the front cog, you can

easily adjust the chain tension by loosening the rear axle nuts slightly, and

adjusting the tension bolts. Make sure that the chain runs freely and re tighten

the axle nuts.

5.4 The brake leavers should lock the wheels when compressed half way between

their open position and touching the handlebars. When the need adjusting use

the following methods:

Front brake: Loosen the nuts the cable clamp, then tension or release the steel

cable, until the gap between the wheel and brake rubber is 1.5 to 2.0 mm.

Rear brake: Loosen the nuts on the cable clamp, then tension or release the

steel cable until you can feel the brake lever's motion is fluid and does not

lock the back wheel until it is the correct position.

Warning: Braking distances increase on wet or icy roads.

5.5 Regularly lubricate the gears and chain with light oil and the brake bushes (not

the rubber brake shoes) with a little grease.

6. Introduction to Main components/parts

derailleur

-3-

1.front light 7.quick release 13 rear

2.gear lever 8.seat post 14. gears

3.brake lever 9.battery 15. motor

4.fork 10.controller

5.brake cable 11.battery lock