DynAccess Hydra Monoski Manuel du propriétaire - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} DynAccess Hydra Monoski. DynAccess Hydra Monoski 16 pages.

6. Pull the carabineer with the rear evacuation strap up over your head, and put the two

side evacuation straps in the carabiner.

7. Screw the carabiner tight so it cannot open.

8. Attach the carabiner with the three evacuation straps to the evacuation line.

9. Once the evacuation line is taut, hold on to the evacuation straps. Follow the

instructions of the rescue team.

Maintenance and Service

Frequent inspection of your monoski is very important for your safely. Keeping the

monoski clean and free from salt, dust and other abrasive particles will greatly reduce

wear and increase the life of your monoski. Periodic, more detailed maintenance and

service is also important. The frequency of the service and maintenance depends upon

the use of your monoski, how hard you use it and where you use it. Because we can not

track your use, you must take responsibility for periodically maintaining and servicing

your monoski. Please contact DynAccess to order replacement parts such as buckles,

straps, evacuation straps and other parts.

All belts (seat belts, evacuation straps, etc.) should be replaced at least once every year.

DynAccess recommends having the monoski professionally serviced once per year.

DynAccess can check the monoski, replace worn hardware (bearings, rod ends, nuts and

bolts, etc), repair any damage, and service the shock.

Professional shock service includes disassembling the shock, cleaning and checking all

parts, replacing ice scrapers, seals, O-rings, worn valves, etc., re-assembling the shock,

filling new oil and vacuum degassing it. If desired the shock can be re-valved (for

example, if you're skiing with the rebound almost all the way in, then the shock can be

re-valved such that your desired setting is near the middle of the range of the rebound

adjuster).

Warning!

Replacing any component on your monoski with other than genuine replacement parts

and components is not recommended and may compromise the safety of your monoski

and may void the warranty. It can result in serious injury or death.