GREAT PLAINS BD7600-26 Manuel d'ajustement des champs - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'ajustement des champs pour {nom_de_la_catégorie} GREAT PLAINS BD7600-26. GREAT PLAINS BD7600-26 12 pages. Box drill

General Information:

1) Visually inspect the drill for any signs of loose hard-
ware or hydraulic fittings.
2) Inspect and lubricate all chains with chain lube.
4) Inspect all chains daily for proper adjustment:
5) Lubricate the clutch cams daily with grease along
with spraying the hex coupler with chain lube. Remove
all buildup of grease and residue on clutches once a
year.
6) Check the tire pressure on all tires, as incorrect tire
pressure will affect seeding rate and levelness of the
drill.
Hydraulic Hookup: Refer to the table to the right for
proper hydraulic hose identification:
Hitch Height Adjustment: Adjust the drill hitch to
match the tractor draw bar height.
1) With the drill lowered to field position, extend the
jack so the lowest hitch hole is 18 inches above ground
level (A).
2) Install the drill hitch onto the tongue to match the
tractor draw bar height. The hitch can be turned over
for six different hitch heights. Always have two bolts in
two holes of both the tongue and hitch.
Document
#DRUS400C-0012A
Model
Transport 320/70R15
BD7600(HD)-26
Transport 305/70R16.5
BD7600(HD)-30
Gauge Wheel 10.0x15
Transport 380/55R16.5
BD7600(HD)-40
Gauge Wheel 340/6R16.5
Color
Red
Blue
Gray
Green
Yellow
(B) - 32.0 in (81.3 cm)
(C) - 29.0 in (73.7 cm)
(D) - 26.0 in (66.0 cm)
(E) - 21.5 in (24.6 cm)
(F) - 18.5 in (47.0 cm)
(G) - 15.5 in (39.4 cm)
2 of 12
Tire Size
Pressure
9.5LX15-8 PLY

Hydraulic Function

Opener Lift Cylinders
Transport Lift Cylinders/Jack
Fold Cylinders
Marker Cylinders (Optional)
Hydraulic Drive
52 PSI
44 PSI
73 PSI
73 PSI
73 PSI
73 PSI