DynaColor EDNS V3000 Manuel de configuration

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} DynaColor EDNS V3000. DynaColor EDNS V3000 14 pages.

Imprimer la page
Package Content
Inspect the packaging carton. Make sure the Ernitec EDNS V3000 is properly delivered. Remove
all items from the box and make sure the box contains the following items.
Ernitec EDNS V3000
*Power adaptor is provided for Standard Models only.
Front Panel
1
Play
2
Pause
3
Sequence
4
Display
5
Menu
6
Search
7
Exit
8
Channels
9
Alarm LED
10
Network LED
11
Record LED
12
HDD LEDs
13
Shuttle/ Jog
14
USB 2.0 Port
00P5DG080F4SEB2
Ernitec EDNS V3000
Setup Guide
SATA Cable
Press once to start the playback of recorded video. Press again to exit.
Press this key to freeze the current viewing screen.
Press this key to start automatic sequence display of cameras.
Press this key to view in full-screen or multiple window modes.
Press this key to enter the OSD setup menu.
Press this key to search recorded video by date/time or event.
Press this key to cancel or exit from certain control mode.
1. In Live and Playback modes, press any key to view the corresponding
video in full-screen.
2. In input interface, 1~10 can be used for direct input of numbers 0~9.
3. In Dome Camera Control mode, 1 is for entering the Set/ Go preset
menu; 11~16 is for quick access of preset points 1~6.
It lights up when an alarm is triggered.
It lights up when network is connected. In addition, it blinks when data is
being transmitted via the network.
It blinks when videos are being recorded.
The LEDs light up when disk cloning is in process. When the light is on
with alert beeping, that means the corresponding HDD has error.
This is used to control playback operations.
The USB 2.0 port allows users to connect an external USB device to the
unit, such as a USB ThumbDrive or a USB mouse.
Power
Power Cord
Adaptor*
User's
Manual
1