HiB Cosmic Manuel rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} HiB Cosmic. HiB Cosmic 2 pages. Aluminium cabinets

Imprimer la page
attaching light fitting -
orbital only
fixing preparation
1) Attach the LED light fitting on the top of
the cabinet using the pre-drilled holes and
the screws provided. Push the male and
female electrical connections together until
they 'click'.
2) Position the cabinet in a suitable location,
(according to Figure 1 on the back page),
ensuring that the domestic electrical mains
supply is within reach of the electrical
connection point of the cabinet. Carefully
mark the position of the top of the cabinet
using a soft pencil.
3) Remove the cabinet from the wall and
using a spirit level, mark a horizontal line
50mm below the original pencil mark. Hold
wall mounting
the mounting bracket in place with the holes
corresponding with the marked line. Ensure
the bracket is central, and mark the position
of the holes.
4) Before drilling, ensure there are no
hidden cables or pipes behind the mounting
points. Drill the required holes in the marked
positions. If drilling through tile, use a
ceramic drill bit. Insert the wall plugs level
with the surface of the wall. If fitting to a tiled
surface, wall plugs should be inserted below
the tile surface to avoid cracking. NB. For
plasterboard walls, specialist fixings should
be purchased, available from any DIY or
hardware store. Fix the bracket to the wall
using the screws provided.
door adjustment
5) This cabinet is provided with an electrical
supply cable already fitted. This cable
should be connected to the household
electrical circuit, and connections should
be made in accordance with the latest IEE
regulations. This is a Class I product and
must be connected to Earth. Ensure the
domestic electrical mains supply to
which the product is being connected is
turned off. Connect the domestic mains
supply according to Figure 2 on the back
page.
6) Hang the cabinet on the wall ensuring that
it is firmly located on the mounting bracket.
Align doors according to the diagram above.
shelf assembly
7) Starting with the top shelf, insert the shelf
supports in the desired position and fit the
shelf.