Great Plains Industries GPRO PRO25-012PO Manuel du propriétaire - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Great Plains Industries GPRO PRO25-012PO. Great Plains Industries GPRO PRO25-012PO 8 pages.

PARTS AND SERVICE

In order to preserve the UL Listing for the motor, do not
attempt to service the motor. For products serviced outside
the factory, the UL nameplate must be defaced to indicate
that the equipment may no longer meet the requirements
for UL Listing. This does not apply to products serviced
outside the factory under the UL program for Rebuilt
Motors for Use in Hazardous Locations.
For warranty consideration, parts, or other service infor-
mation, please contact your local distributor. If you need
further assistance, contact the Great Plains Industries
Customer Service Department in Wichita, Kansas, during
normal business hours.
800-835-0113 or 316-686-7361
To obtain prompt, efficient service, always be prepared
with the following information:
1. The model number of your pump.
2. The serial number or manufacturing date code of your
pump. For the PRO25-012 and PRO25-024 pumps,
the date code is located on the motor nameplate.
3. Part descriptions and numbers.
Part information can be obtained from the Illustrated
Parts Drawing.
02/2017
© 2017 Great Plains Industries, Inc., All Rights Reserved.
Great Plains Industries, Inc. / 800-835-0113 / GPI.net
For warranty work, always be prepared with your original
sales slip or other evidence of purchase date.
Please contact Great Plains Industries before returning
any parts. It may be possible to diagnose the trouble and
identify needed parts in a telephone call. Great Plains
Industries can also inform you of any special require-
ments you will need to follow for shipping fuel dispensing
equipment.
CAUTION
Do not return the pump or parts without authority from the Cus-
tomer Service Department. Due to strict government regulations,
Great Plains Industries cannot accept parts unless they have been
drained and cleaned.
SAVE THESE INSTRUCTIONS
PRO25 Motor for
Hazardous Locations
922106-01 Rev D