Aircraft in Miniature Limited Historic Wings Fokker Spin 1912 Manuel d'instructions de montage - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Aircraft in Miniature Limited Historic Wings Fokker Spin 1912. Aircraft in Miniature Limited Historic Wings Fokker Spin 1912 10 pages. 1:72 metal kit
Imprimer la page
Fret 1
Spare and unused parts
are shown in red.
TAILPLANE
SPAR
FUEL TANK
PYLON
REAR SPAR
CONTROL
COLUMN
SPAR FOLD
TEMPLATE
LEFT WING
1
ASSEMBLE THE SPOKED WHEELS
A Drill a 1/16"/1.5mm diameter hole through the centre of the female form tool as
shown in Figure 1 below. This is to let you push the disc of spokes out of the
form tool after they have been formed into a cone.
B Remove four spoke discs from the fret and remove any burrs from the
attachment tabs (the kit includes four spare discs).
C Form each spoke disc.
(1)
Put each disc into the cavity in the female form tool.
(2)
Put the male form tool into the cavity and press the disc into a cone.
Figure 2 shows a vice being used to compress the form tool.
SKID
FUSELAGE
LEFT LONGERON
LOWER FIN
RIGHT LONGERON
FUSELAGE
PYLONS
FUSELAGE
DRILL HOLE IN FORM TOOL HERE
Figure 1
SEAT
RUDDER ARMS
STRUCTURE
FRONT SPAR
RIGHT WING
UPPER FIN
FUSELAGE
CONTROL
WHEEL
FUSELAGE
PYLON
(spare)