GREAT PLANES EP YAK 55 3D Manuel d'instruction - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} GREAT PLANES EP YAK 55 3D. GREAT PLANES EP YAK 55 3D 16 pages.
Imprimer la page
4. Glue a control horn into this slot from the right side of
the airplane.
5. Push a control horn retainer onto the back side of the
rudder control horn. Secure it with a drop of glue.
6. Install the rudder pushrod in the same manner as the
elevator pushrod.
7. Cut slots in the ailerons in the positions shown.
8. Glue control horns into these slots from the top.
9. Push control horn retainers onto the backs of the
aileron control horns. Secure the retainers with a drop of
glue each.
10. Install the aileron pushrods with the Z-bend through
the servo arm. Secure the pushrods to the control horn with
a micro FasLink.
Install the Motor & Speed Control
1. Solder the output wires of your ESC to the motor. The
positive side of the motor is marked with a red dot. The
output wires should be soldered to the same connection
post as the presoldered capacitors and brush wires.
10