ActiveAid 600 Manuel du propriétaire - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} ActiveAid 600. ActiveAid 600 19 pages.

4. Insert the rear anti-tippers to extend towards the rear of

the chair as shown. With the plastic washer on the screw,

re-insert the screw through the holes in the chair frame

and rear anti-tippers.

Note: Screw head should be to the outside of the frame and

the nut to the inside.

Hand start the nut onto the end of the screw.

5. Use a wrench and hex key to tighten the rear

anti-tippers into place.

Repeat step 4 and 5 for the second rear anti-tipper.

6. Set chair frame on its back end as shown. Loosen then

remove the self-locking nut, plastic washer and machine

screw that are in the chair frame where the casters will be

inserted. If the 4 casters were ordered remove all 4

self-locking nuts, plastic washers and machine screws

that are in the chair frame where the casters will be

inserted.

Remove