GREAT PLANES Mini Slinger Manuel d'instruction - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} GREAT PLANES Mini Slinger. GREAT PLANES Mini Slinger 12 pages.
Imprimer la page
remained structurally sound. Be sure to check connectors often
and replace them if they show any signs of wear or fatigue.
7. If you are not an experienced pilot or have not flown this
type of model before, we recommend that you get the
assistance of an experienced pilot in your R/C club for your
first flights. If you're not a member of a club, your local hobby
shop has information about clubs in your area whose
membership includes experienced pilots.
8. While this kit has been flight tested to exceed normal use,
if the plane will be used for extremely high stress flying, such
as racing, or if a motor larger than one in the recommended
range is used, the modeler is responsible for taking steps to
reinforce the high stress points and/or substituting hardware
more suitable for the increased stress.
We, as the kit manufacturer, provide you with a top quality,
thoroughly tested kit and instructions, but ultimately the
quality and flyability of your finished model depends on
how you build it; therefore, we cannot in any way
guarantee the performance of your completed model, and
no representations are expressed or implied as to the
performance or safety of your completed model.
Remember: Take your time and follow the instructions to
end up with a well-built model that is straight and true.
ADDITIONAL ITEMS REQUIRED
Radio Equipment and Electronics
The Mini Slinger requires a micro receiver and two micro
servos (9 g or less). If you already have a transmitter you are
going to use to fly the Mini Slinger, you can get the receiver
and servos separately:
❏
Futaba
®
R114F 4-channel FM micro receiver w/o crystal
(low band: FUTL0442, high band: FUTL0443)
❏
Futaba FM single conversion receiver crystal for R114F
(low band: FUTL62**, high band: FUTL63**)
❏
Futaba S3108 micro servo 7.6 g (FUTM0042)
Or, you can purchase a complete system (including
transmitter) specially packaged for park flyers. If purchasing
a complete system, the Futaba 3FR Skysport single-stick
radio is suitable. It comes with a micro receiver and two
Futaba S3108 micro servos. The transmitter is also
equipped with a rechargeable NiCd battery pack:
❏
Futaba 3FR Skysport single-stick radio system including
transmitter, receiver, and servos (FUTJ53**)
An 8-cell 9.6V NiMH battery pack and suitable charger are
also required. Although there are different battery packs and
chargers available that will work with the Mini Slinger, the
economical choices recommended by Great Planes are:
❏
Great Planes 9.6V 2/3AAA 350mAh (GPMP0067)
❏
Great Planes ElectriFly DC peak charger (GPMM3000)
Speed Control
An electronic speed control with BEC (Battery Eliminator
Circuitry) is required. The BEC allows both the motor and
the radio system to be powered by the same battery (thus
eliminating the on-board receiver battery). The Great Planes
ElectriFly C-12 Micro Brushed Frequency Electronic Speed
Control (GPMM2015) is recommended.
The Mini Slinger is equipped with elevons that operate both
as elevators and ailerons. The elevons must be mixed
together to function properly using an auxiliary Elevon Mixer
(GPMA2428) or a computerized transmitter that features an
elevon mixing function. The elevon mixer (or elevon mixing
function in transmitter) allows the elevons to move up and
down together when elevator input is given and allows them
to move opposite each other just like typical ailerons function
when aileron input is given.
Adhesives and Building Supplies
This is the list of Adhesives and Building Supplies that are
required to finish the Mini Slinger ARF.
❏
Pro
6-Minute Epoxy (GPMR6042)
™
❏
Pro Foam-Safe CA Glue, 1 oz (GPMR6069)
❏
Hobby Knife with #11 Blade (HCAR0105)
❏
Rubbing Alcohol
❏
Top Flite
®
Masking Tape (TOPR8018)
❏
Transparent Tape
❏
1.6 mm [1/16"] drill bit
❏
Soldering Iron (HCAR0776)
Optional Supplies and Tools
❏
Great Planes Epoxy Brushes (6, GPMR8060)
❏
Great Planes Mixing Sticks (50, GPMR8055)
❏
Great Planes Mixing Cups (GPMR8056)
❏
Great Planes AccuThrow
❏
Great Planes CG Machine
❏
Heat Shrink Tubing for Servos (TRIC6047)
3
Mixer
Deflection Gauge (GPMR2405)
™
™
(GPMR2400)