DaySequerra M2A-FM Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DaySequerra M2A-FM. DaySequerra M2A-FM 16 pages. Analog fm modulation monitor

Imprimer la page

Important Safety Information

•
Indoor use only. Not for use in wet or damp environments.
•
Maximum Relative Humidity: <80%
•
Class I Equipment (grounded type)
•
Electrical rating: 100-120/220-240V~50-60Hz 18W
•
Fuse Rating: 2A 250V 20MM
•
AC Mains supply voltage fluctuations are not to exceed +10% of the nominal voltage
•
Operations temperature range -40°C to 70°C
•
Maximum altitude: 3000m (9843ft)
•
Equipment suitable for continuous operation
•
Weight: 5.4kg (12lbs) equipment only; 8.2kg (18lbs) shipping
Important Note: Please connect your M2A-FM to an uninterruptible power supply (UPS) to
provide other protection against power surges and brownouts.

Service Information

The DaySequerra M2A-FM contains no user serviceable components inside the unit. Please contact
DaySequerra for repair and upgrade information. In the event that your unit needs to be returned to the
factory, contact us for a return authorization number.
momentarily displayed at start-up for your convenience. Please visit www.daysequerra.com and
register your new M2A-FM so we can keep you informed of the latest hardware and software
updates.

Introduction

The DaySequerra M2A-FM is the world's best analog FM monitor complete with world-wide tuning and
de-emphasis settings. The M2A-FM measures your analog signal with digital accuracy, insuring that
readings will remain stable and reliable over time. Selectable measurement integration times let you
control peak reading for maximum modulation.
The M2A-FM includes a sensitive yet selective synthesized FM pre-selector with 20 presets so you can
quickly monitor other stations off the air. A high level input with built-in attenuator lets you connect
directly to a forward power RF port for greatest accuracy. RBDS Program Identification (PI) and Radio
Text (RT) fields are decoded and shown on the M2A's Vacuum Florescent Display (VFD).
The M2A's brilliant LED meters can be read from across the room. The upper meters measure stereo,
L+R, L-R and incidental AM noise. The lower meter measures positive and negative carrier deviation,
as well as pilot and SCA injection levels. 57kHz RBDS subcarriers can be accurately read to a
minimum level of 2.6 percent. An MPX output lets you connect external SCA demodulators.
The M2A-FM comes complete with six dry contact alarm relay outputs for loss of audio program,
carrier, pilot and RBDS as well as audio peak and over modulation, all with flexible settings for level
and duration.
4
M2A-FM User Manual
The monitor ID and firmware version is