DaySequerra M4 Series Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DaySequerra M4 Series. DaySequerra M4 Series 16 pages. Hd radio tuner
Imprimer la page- 1. Table of Contents
- 2. Important Safety Information
- 3. Service Information
- 4. Introduction
- 5. M4 Series Key Features
- 6. M4 Series Technical Specifications
- 7. Unpacking and Installing
- 8. Front Panel Controls and Indicators
- 9. M4 Series Operating Description
- 10. Sample VFD Displays
- 11. Performance Loss Monitor
- 12. M4.2R Ethernet Port Setup
- 13. Three Year Warranty
M4 Series Key Features
SEPARATE AM AND FM ANTENNA INPUTS – Industry standard 75-ohm "F" connectors
STEREO ANALOG OUTPUTS – Balanced (+4dBm) for 100% analog modulation on XLR connectors
DIGITAL AUDIO OUTPUT – 110-ohm transformer isolated XLR for HD Radio
IEC320 POWER INLET – Integrated fuse holder on rear panel
SYNTHESIZED TUNING – AM and FM bands including multicast channels each with 20 presets
VACUUM FLUORESCENT DISPLAY – Multi-function VFD for tuner and station status
LEFT AND RIGHT AUDIO LEDS – Audio signal present indication
PEAK LEVEL LED – Flashes red for over +4dBm demodulated audio output (either channel)
HD LOCKED – HD Radio
DELAY SET – Indicates active analog diversity delay for HD Radio
HEADPHONE OUTPUT – Recessed screwdriver gain control on front panel
A-D SPLIT MODE – HD Radio
RBDS DECODING – (M4.2R only) Program Service (PS) and Radio Text (RT) fields displayed on VFD
PROGRAMMABLE STATUS ALARMS – M4.2R and M4.0X PLM option provides 6 dry-contact relays
FULL TIME DIGITAL AUDIO OUTPUT – (M4.2R only) For HD Radio
M4 Series Technical Specifications
RF TUNING RANGE
RF USEABLE SENSITIVITY
RF USEABLE INPUT RANGE
IF REJECTION
AF BANDWIDTH
AF THD+N
STEREO CHANNEL SEPARATION
TM
HD Radio
HYBRID ACQUISITION
TM
HD Radio
BLEND LEVEL ACCURACY < 0.5dB
TM
HD Radio
PAD DATA DISPLAY
TM
audio present, indicates digital carrier S/N > 58dB/Hz
TM
level, phase and time alignment monitor for analog diversity delay
AM – 520kHz to 1720kHz in 10kHz increments
FM – 87.9MHz to 108.1MHz in 200kHz increments
AM – 5dBf (0.9µV) 20dB SNR at 30% modulation
FM – 5dBf (0.9µV) 30dB SNR at 100% modulation
15µV to 30KµV – AM or FM
AM – greater than 100dB for 20dB SNR
FM – greater than 100dB for 30dB SNR
AM – + 1dB 40Hz to 15kHz
FM – + 1dB 20Hz to 20kHz
< 0.005% (digital audio)
> 90dB (digital audio)
< 4.5 seconds
HD Radio
message per iBiquity
TM
broadcasts
TM
and analog broadcasts
TM
data fields limited to a total of 1018 bytes per
TM
specifications.
TM
broadcasts
M4 User Manual
5