HiB Air-Star Silver Manuel rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} HiB Air-Star Silver. HiB Air-Star Silver 4 pages.

Imprimer la page

Fitting

Choose a suitable position for your fan

according to Figure 1 opposite. Use a

cable finder to check if there are any

buried cables or pipes in the ceiling.

Ceiling mounted ventilation should

be ducted through the roof space, by

ducting to an external soffi t under the

eaves or grille in the slope of your roof.

NB: Ducting installed between a floor and

ceiling can only run between joists, not

across them.

Mark the position of the vent fascia with a

pencil in a suitable position on the ceiling,

making sure that it is between the joists.

Drill a 9mm hole through the ceiling

anywhere along the edge of the pencil

line. Now cut out the hole with a pad saw.

Hold the vent fascia against the ceiling

and mark the position of the fixing holes.

Fix the unit in place using suitable heavy

duty plasterboard fixings (not supplied).

Attach flexible ducting (not supplied) with

the metal hose clamps. Ensure that the

ducting has a smooth flow towards the

external grille to minimise air resistance.

Follow a similar procedure for the outside

wall grille.

Electrical Connection

Casing

Terminal block

Lamp terminal block

Lamp socket

Hole for power wires

Holes for fan mounting

Ensure the domestic electrical mains

supply to which the fan is being

connected is turned off. This product

is designed to be connected to an on/

off switch outside the bathroom, or to a

ceiling mounted pull cord switch.Ensure

the domestic electrical mains supply

to which the fan is being connected is

turned off. This product is designed to be

connected to an on/off switch outside the

bathroom, or to a ceiling mounted pull

cord switch.

Remove the protecting grille and lamp.

This product is SELV and the mains power

should be connected to the transformer

supplied. See diagram below.