AFG 2.0 AE Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AFG 2.0 AE. AFG 2.0 AE 17 pages.

Imprimer la page
AS SE MB LY ST EP 2
CONSOLE MAST
WATER BOTTLE CAGE
BOLT (D)
TOP CAP
MAIN FRAME
A.
Open HARDWARE BAG FOR STEP 2.
Slide cONSOLE MAST BOOT and TOP cAP onto the bottom of the cONSOLE MAST.
B.
C.
Carefully pull the cONSOLE WIRES through the cONSOLE MAST using the twist tie located inside the
cONSOLE MAST.
DO NOT PINcH WIRES!
D.
Attach the cONSOLE MAST to the MAIN FRAME using 4 BOLTS (E), 4 WASHERS (W) and 4 SPRING WASHERS
(Y)in the front and 2 BOLTS (F), 2 WASHERS (W), 2 SPRING WASHERS (Y) and 2 NUTS (X) from the side.
E.
Attach the WATER BOTTLE HOLDER to the mast using 2 BOLTS (D).
HARDWARE BAG FOR STEP 2 CONTENTS :
BOLT (D)
15 mm
Qty: 2
WASHER (W)
8.2 mm
Qty: 6
2.0 AE_Rev.1.6.indd 8-9
BOLT (E)
NUT (X)
WASHER (W)
SPRING WASHER (Y)
BOLT (F)
WASHER (W)
SPRING WASHER (Y)
BOLT (E)
BOLT (F)
15 mm
70 mm
Qty: 4
Qty: 2
NUT (X)
SPRING WASHER (Y)
Qty: 2
8.2 mm
Qty: 6
ASSEMBLY STEP
A.
Open HARDWARE BAG FOR STEP 3.
B) Slide RIGHT HANDLEBAR onto cONSOLE MAST and attach using 1 BOLT (G), 1 WASHER (H) and
1 WAVY WASHER (I).
C) Repeat on other side.
After handlebars are assembled they will rotate freely – be cautious. Until the
WARNING
machine is fully assembled, do not grab the handlebars for support.
HARDWARE BAG FOR STEP CONTENTS :
BOLT (G)
WASHER (H)
15 mm
Qty: 2
Qty: 2
RIGHT HANDLEBAR
WAVY WASHER (I)
WASHER (H)
BOLT (G)
WAVY WASHER (I)
Qty: 2
angle view
8/27/07 3:29:58 PM