HiB RadioStar tempo Manuel d'instruction - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} HiB RadioStar tempo. HiB RadioStar tempo 8 pages.

Imprimer la page

SETTINGS

Remove the plastic tab from the bottom of the remote control to establish the

battery connection.

On / Off

Press 'POWER' to switch the FM radio on / off.

Volume Control

Volume up with 'VOL+' or 'V+' / Volume down with 'VOL-' or 'V-'.

Antenna

The antenna consists of the telescopic antenna, the integrated frame antenna and the

external antenna connection.

- Frame antenna:

The steel casing of the RadioStar Mirror is used.

- Telescopic antenna:

A telescopic antenna is mounted on top of the steel casing.

When the antenna is half-extended, it can be clamped.

In most cases, the antenna can be hidden from view.

- External connection:

There is an external antenna connection on the base of the

telescopic antenna.

This alternative should only be used if reception is not

satisfactory, even after adjusting the telescopic antenna.

Starting the Station Scan Automatically

Start the station scan by pressing 'TUN+' or 'TUN-' for approximately 3 seconds.

Starting the Station Scan Manually

Press 'TUN+' or 'TUN-' in short intervals to adjust the stations manually.

The FM radio reception can be optimized by adjusting the telescopic antenna.

Station Memory with the Control Panel

You can save up to 10 radio station presets. First, select your preferred FM station.

Press 'TIME' for 3 seconds, and then select where to save it by pressing 'PRESET'

repeatedly.

Press 'TIME' again to ﬁ nish.

- 9 -

Station Memory with the Remote Control

You can save up to 10 radio station presets. First, select your preferred FM station.

Press 'TIME' for 3 seconds, and then select where to save it by pressing the number

buttons '1-10'.

Press 'TIME' again to ﬁ nish.

Station Memory Changing

If you try to save a new station under a preset that has already been assigned, the

previous station will be deleted and the new one will be saved in its place.

Selecting Saved Stations

By pressing 'PRESET' on the control panel, or by pressing the number buttons '1-10'

on the remote control, the saved station will be selected.

Setting the Time Mode 12 / 24 Hours

The clock display can be set in 12 or 24 hours mode. Start by turning off the radio.

Activate the clock mode by pressing 'TIME' for 3 seconds. By pressing 'PRESET'

you can choose between 12 / 24 hours mode. Time will be displayed in the 12 hour

mode if a dot appears in the upper left of the display. You are in 24 hour mode if the

dot is not displayed.

To save the selected time mode, press 'TIME'.

Setting the Time

First, turn off the radio.

Activate the clock mode by pressing 'TIME' for 3 seconds.

Adjust the minutes by pressing 'TUN-'.

Adjust the hours by pressing 'TUN+'.

Press 'TIME' to save the time.

Setting the Radio Alarm Clock

To have the radio automatically turn on at a speciﬁ c time, the clock must be set ﬁ rst.

Turn off the radio, and activate the radio alarm clock mode by pressing 'VOL-' or 'V-'

for 3 seconds.

Adjust the minutes by pressing 'TUN-'. Adjust the hours by pressing 'TUN+'.

Press 'VOL-' or 'V-' to save the turn on time. The radio will turn on automatically to

the most recently used frequency at the selected time.

RadioStar

- 10 -